【求助】610c不开机
我的610C开机时，左上角三个灯同时亮一下就灭了，然后就只有左下角第一个灯亮了。主板风扇不转，液晶也不亮，只有在开一次才能开开，有时要反复了N次才能开机。开机后只有三四分钟就有死机了，有时黑屏，有时出现蓝屏，并出现错误代码：
A problem has been detected and windows has been shut down to your computer.
If this is the first time you’ve seen this stop error screen restart your computer .If this screen appears again , follow these steps pun a system diagnostic utility supplied by your hardware manufacturer . In particular run a memory check , and check for faulty or mismatched memory . Try changing video adapter.
Disable or remove any newly installed hardware and drivers. Disable or remove any newly installed soft ware . If you need to use safe mode to remove or disable components restart your computer, press F8 to select Advanced startup options and select safe mode .
Technical information:
Stop:0×0000007F（0×0000000D，0×00000000，0×00000000，0×00000000）
Beginning dump of physical memory physical memory dump complete contact your system administrator or technical support group for father assistance.
现在装系统只能装一半就死机，可是在DOS下检测硬盘开机多久就不会死机。
请问怎样处理?谢谢了 先试试最小化系统开机。就是硬盘，内存，电池，网卡都拨了，看看屏幕能不能点亮。 显卡:D :D Posted by zljsfgitfk on 2008-7-10 09:48 http://www.ibmnb.com/images/common/back.gif
先试试最小化系统开机。就是硬盘，内存，电池，网卡都拨了，看看屏幕能不能点亮。
点不亮了只有左边的一个灯亮 Posted by amwayau on 2008-7-10 09:59 http://www.ibmnb.com/images/common/back.gif
显卡:D :D
显卡坏了吗?显卡不是集成的吗,哪不是要换主板了。 我的610V也这样过，把内存再插下或者把电全把了就好了，挺奇怪的。 上个 XP 错误号正解
// MessageId: BUGCODE_PSS_MESSAGE_7F
//
// MessageText:
//
//If this is the first time you've seen this Stop error screen,
//restart your computer. If this screen appears again, follow
//these steps:
//
//Run a system diagnostic utility supplied by your hardware manufacturer.
//In particular, run a memory check, and check for faulty or mismatched
//memory. Try changing video adapters.
//
//Disable or remove any newly installed hardware and drivers. Disable or
//remove any newly installed software. If you need to use Safe Mode to
//remove or disable components, restart your computer, press F8 to select
//Advanced Startup Options, and then select Safe Mode.
//
//Refer to your Getting Started manual for more information on
//troubleshooting Stop errors.
可以很肯定滴说,你的内存松啦,小问题,拆下来重新插过吧
页:
[1]