【求助】windows7下装buttom utility错误

zhaosky9

求教各位！
机器为富士通T2010，系统是WINDOWS7旗舰版；安装富士通工具软件buttom utility时出现错误如下：
SetSlate returned error, FjSetSlt is exiting ，之后安装完成。
以后每次启动系统的时候都会提示  SetSlate returned error, FjSetSlt is exiting ；
卸载buttom utility后正常。
在网上参考，个人认为可能原因为.net framework 2.0 没有装好！
现WINDOWS7中已含了.net framework 3.5（不兼容.net framework 2.0），想在WINDOWS7下安装.net framework 2.0来解决问题（尝试没有成功，安装不上，有高版本）

请教各位有其他解决方法没有？
谢谢！！

zhaosky9

自己顶一下！

cooldavy

在安装各类utility之前，请确认所有相关的driver都安装好了

dyv

我在P1630上安装xp，也遇到这个情况，导致现在，那5键也没驱动，当作摆设了，郁闷

sales_geng

进来学习一下。

youruoyixi

我的t4215也是

dyv

换win7了，开始也发现这个问题，反复实验了几次，才发现安装顺序：
先装System Extension Utility
再装Hotkey Utility
Button Driver
Fixed_Tablet_Bottun_Utility_XPTPE_Hibiki_V7.02.0506.2008
别装Button Utility
就不会出现错误窗口了

xtp1230

我win10下装过两次按键驱动，都遇到这个问题。第一次我解决了，可我没牢记是怎么解决的。第二次又重复上网搜索这个问题的解决方案，真是做无用功，早知道好记性不如烂笔头了。后来找到解决方法，其实上次也是这样解决的。就说安装按键驱动的时候要关闭UAC设置。参考这篇帖子：https://blog.flexuous.com/2010/1 ... e-on-windows-7-x64/

Originally I tried the procedures outlined by a number of people to uninstall the button utility, reboot, uninstall driver, reboot, delete the buttons directory under the program files/fujitsu directory, reboot then reinstall the driver, reboot, reinstall the utility…..

unfortunately this didn’t work.

However, I noticed that during the installation process, Windows7 as usual would ask the typical UAC question… “This program is attempting to make changes to the system…. ”  (or whatever it normally says) and the install program opened a couple of command windows.  These windows would then generate a couple of errors.  This got me to thinking about some issues I was having with some other software on my new development machine at work… and I had an idea……

I turned off User Access Control and rebooted.

now… with UAC turned off I followed the directions..

Uninstall the button utility
Reboot
Uninstall the button drivers
Reboot
Re-install the button drivers
Reboot
Re-install the button utility
Reboot
….. it worked!   The buttons started to work……

xtp1230

补充一下，我的是富士通T5010。